Latest IEC International Electrotechnical Commission Site

IEC 60364-6:2016-Low voltage electrical installations-Part 6: Verification, IEC 60455-3-4:2003-Resin based reactive compounds used for electrical insulation-Part 3: Specifications for individual materials-Sheet 4: Filled polyurethane compounds, IEC 80601-2-58:2014-Medical electrical equipment-Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery, IEC 60034-18-41:2014/AMD1:2019-Amendment 1-Rotating electrical machines-Part 18-41: Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters-Qualification and quality control tests, IEC 60216-4-3:2000-Electrical insulating materials-Thermal endurance properties-Part 4-3: Ageing ovens-Multi-chamber ovens, IEC 60335-2-87:2016/AMD1:2018-Amendement 1-Household and similar electrical appliances-Safety-Part 2-87: Particular requirements for electrical animal stunning equipment, ISO 80601-2-84:2020-Medical electrical equipment-Part 2-84: Particular requirements for the basic safety and essential performance of ventilators for the emergency medical services environment, IEC 63203-201-3:2021-Wearable electronic devices and technologies-Part 201-3: Electronic textile-Determination of electrical resistance of conductive textiles under simulated microclimate, IEC TS 60034-24:2009-Rotating electrical machines-Part 24: Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents-Application guide, IEC 60404-8-7:2017-Magnetic materials-Part 8-7: Specifications for individual materials-Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully processed state. For more, see this IEC 60947-8:2003/AMD2:2011-Amendment 2-Low-voltage switchgear and controlgear-Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines for the best downloads.



IEC 60423:2007-Conduit systems for cable management-Outside diameters of conduits for electrical installations and threads for conduits and fittings, IEC 61189-5-601:2021-Test methods for electrical materials, IEC 61540:1997-Electrical accessories-Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs), IEC 60335-2-35:2012/AMD2:2020-Amendment 2-Household and similar electrical appliances-Safety-Part 2-35: Particular requirements for instantaneous water heaters, IEC 60819-3-1:2001-Non-cellulosic papers for electrical purposes-Part 3: Specifications for individual materials-Sheet 1: Filled glass paper, IEC 60335-2-45:2002/AMD1:2008-Amendment 1-Household and similar electrical appliances-Safety-Part 2-45: Particular requirements for portable heating tools and similar appliances, IEC 62933-2-1:2017-Electrical energy storage (EES) systems-Part 2-1: Unit parameters and testing methods-General specification, IEC 60335-2-101:2002+AMD1:2008 CSV-Household and similar electrical appliances-Safety-Part 2-101: Particular requirements for vaporizers, IEC 60335-2-78:2002/AMD2:2019-Amendment 1-Household and similar electrical appliances-Safety-Part 2-78: Particular requirements for outdoor barbecues, IEC 60811-302:2012-Electric and optical fibre cables-Test methods for non-metallic materials-Part 302: Electrical tests-Measurement of the d.c. resistivity at 23 ?C and 100 ?C of filling compounds. For more, see this IEC 60450:2004-Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials for more recommendations.



IEC 60674-3-8:2011-Plastic films for electrical purposes-Part 3: Specifications for individual materials-Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation, IEC 60601-2-31:2020-Medical electrical equipment-Part 2-31: Particular requirements for the basic safety and essential performance of external cardiac pacemakers with internal power source, IEC 60335-1:2010/AMD1:2013-Amendment 1-Household and similar electrical appliances-Safety-Part 1: General requirements, IEC 60704-2-14:2013/AMD1:2019-Amendment 1-Household and similar electrical appliances-Test code for the determination of airborne acoustical noise-Part 2-14: Particular requirements for refrigerators, IEC 60335-2-31:2012/AMD2:2018-Amendment 1-Household and similar electrical appliances-Safety-Part 2-31: Particular requirements for range hoods and other cooking fume extractors, IEC 60364-4-43:2008-Low-voltage electrical installations-Part 4-43: Protection for safety-Protection against overcurrent, IEC 61196-1-106:2008-Coaxial communication cables-Part 1-106: Electrical test methods-Test for withstand voltage of cable sheath, IEC TR 61508-0:2005-Functional safety of electrical/electronic/programmable electronic safety-related systems-Part 0: Functional safety and IEC 61508 (see Functional Safety and IEC 61508), IEC 61196-1-107:2005-Coaxial communication cables-Part 1-107: Electrical test methods-Test for cable microphony charge level (mechanically induced noise), IEC 61557-13:2011-Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.-Equipment for testing. Follow this IEC 62125:2019-Environmental considerations specific to insulated electrical power and control cables for all the recommendations.



IEC TS 60034-20-1:2002-Rotating electrical machines-Part 20-1: Control motors-Stepping motors, IEC 60335-2-89:2019-Household and similar electrical appliances-Safety-Part 2-89: Particular requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor, IEC 61628-1:1997-Corrugated pressboard and presspaper for electrical purposes-Part 1: Definitions, IEC/IEEE 62582-4:2011-Nuclear power plants-Instrumentation and control important to safety-Electrical equipment condition monitoring methods-Part 4: Oxidation induction techniques, IEC 60364-7-707 Ed. 1.0-Electrical installations of buildings. Part 7: Requirements for special installations or locations. Section 707: Earthing requirements for the installation of data processing equipment, IEC 61010-2-020:2016-Safety requirements for electrical equipment for measurement, IEC 60601-2-63:2012/AMD2:2021-Amendment 2-Medical electrical equipment-Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment, IEC 60364-5-55:2011/AMD2:2016-Amendment 2-Electrical installations of buildings-Part 5-55: Selection and erection of electrical equipment-Other equipment, IEC 60730-2-14:2017/AMD1:2019-Amendment 1-Automatic electrical controls-Part 2-14: Particular requirements for electric actuators, IEC 60335-2-26:2002-Household and similar electrical appliances-Safety-Part 2-26: Particular requirements for clocks.